Gold Member Since 2011
Audited Supplier
Nanjing Jinglue FRP Co., Ltd.

Frp, Grp, Fiberglass Frp manufacturer / supplier in China, offering GRP Pultruded Products, Fiberglass Profile (Angle Bar), FRP Pultruded Profile (Pipe) and so on.

(/ )

GRP Pultruded Products

FOB Price: Get Latest Price
Min. Order: 2 Tons
Transport Package: Pallet, Plastic Bag, Carton, etc.
Payment Terms: L/C, T/T, etc.

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: GRP Pultruded Products used In Electricity
  • Craft: Pultrusion
  • Color: Many Colors Can Be Achieved
  • Trademark: JLF
  • HS Code: 3626909090
  • Raw Materials: Resin, Fiberglass, Agents, etc.
  • Surface: Smooth or Sanded If Needed.
  • Applications: Used in Electricity.
  • Origin: Nanjing, China
Product Description
1. Properties of GRP pultruded profiles

A. High strength
GRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.

B. Light weight
GRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.

C. Anti-corrosion
GRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.

D. Electro-magnetic transparency
GRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.

E. Non-conductive
GRP has low thermal/ electrical conductivity.

F. Dimensional stability
The coefficient of thermal expansion of GRP is slightly less than steel and significantly less than aluminum.

G. Aesthetics
GRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.

2. Craft and Raw Materials
GRP pultruded profiles are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.

GRP pultruded profiles can meet the customer's requirements by using different combination of resin, fibers and others.

GRP pultruded profiles offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.

3. Applications
The above FRP profiles are widely used in electricity as its good combination of low electrical conductivity and high anti-corrosion.

4. Following is General Physical Parameters of FRP Pultruded Profiles. (If have special requirements, pls contact Nanjing Jinglue. )
Mechanical performance Value  Units Test method
Tensile strength LW 230-600 Mpa ASTM D-638
CW 45-80
Tensile modulus LW 18-30 Gpa ASTM D-638
CW 7-13       
Flexural strength LW 300-700 Mpa ASTM D-790
CW 80-120
Flexural modulus LW 20-26 Gpa ASTM D-790
CW 7-12
Compressive strength LW 280 Mpa ASTM D-695
CW 105
Compressive modulus LW 21 Gpa ASTM D-695
CW 7.9
Interlayer shear strength LW 25 Mpa ASTM D-2344
Impact strength   280 KJ/M2 ASTM D-256
 
Physical property Value Units Test method
Barcol Hardness 50 --- ASTM D-495
Water absorption(25 Centigrade,24h) 0.2-0.5 % ASTM D-570
Density 1.75-2.00 g/cm3 ASTM D-792
Coefficient of thermal expansion(LW) 5.0 10-6/Centigrade ASTM D-696
Coefficient of thermal conductivity 0.4 W/(m.K) ASTM C-518
Elongation to break 0.9 % ASTM D-638
 
Electrical property Value Units Test method
Arc resistance(LW) 120 seconds ASTM D-495
Dielectric constant(PF) 5 @60hz ASTM D-150
Dielectric strength(PF) 8 KV/mm ASTM D-149
Dielectric strength(LW) 1.6 KV/mm ASTM D-149
 
Flammability property Value Units Test method
Tunnel test Max 25 second ASTM E-4
Oxygen data 25-28
%

ASTM 2863
28-32
>32
Flammability classification Self extinguish   ASTM D635
Send your message to this supplier
Avatar
Mrs. Yan
Sales Manager
*From:
To: Mrs. Yan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category